crank press machine press screw
J54 series cookware press is used to make stainless steel double bottom cookware. It is a high precision pressing device.
Products Details
Products Details
J54 series cookware press is used to make stainless steel double bottom cookware. It is a high precision pressing device. This machine has following advantages: 1. whole stroke brake 2. photoelectricity protection system. 3. saving energy and materials 4. high efficiency 5. simple and stable structure 6. large energy 7. long working life
Main parameters | Unit | J54-630C | J54-1000C | J54-1600C | J54-1600D | J54-2500 | J54-3150 | J54-4000 | |
Nominal force | KN | 6300 | 10000 | 16000 | 16000 | 25000 | 31500 | 40000 | |
Maximum force | KJ | 10000 | 16000 | 25000 | 25000 | 40000 | 50000 | 60000 | |
Stroke of ram | mm | 600 | 700 | 700 | 700 | 800 | 800 | 900 | |
Times of stroke | min-1 | 11 | 10 | 10 | 10 | 9 | 9 | 9 | |
Minimum shut height | mm | 650 | 700 | 750 | 750 | 980 | 1100 | 1120 | |
Height of bolster | mm | 180 | 200 | 200 | 200 | 280 | 300 | 300 | |
Dimention of | front/back | mm | 920 | 1200 | 1250 | 1250 | 1560 | 2000 | 2000 |
working table | left/right | mm | 820 | 1000 | 1100 | 1100 | 1200 | 1300 | 1300 |
front/back | mm | 4320 | 5355 | 4500 | 4500 | 6797 | 5400 | 5600 | |
Overall size | left/right | mm | 4694 | 4900 | 5742 | 5742 | 5727 | 7400 | 7561 |
height | mm | 6060 | 7290 | 8090 | 8090 | 9410 | 10185 | 10385 | |
Main motor power | KW | 55 | 90 | 132 | 132 | 2X110 | 2X160 | 2X185 | |
Weight | Kg | 45000 | 83000 | 112000 | 112000 | 222000 | 320000 |
_副本.jpg)


The working principle of crank press machine
The crank press conveys the motor's motion and energy to the crankshaft through the transmission system, causes the crankshaft to make a rotational movement, and causes the slider to reciprocate through the connecting rod.
The motor rotates the crankshaft through a pinion gear, a large gear (flywheel) and a clutch, and then reciprocates the slider in the guide rail of the body through a connecting rod. The upper die of the die is fixed on the slider, and the lower die is fixed on the worktable of the fuselage, and the press can press the stamped material placed between the upper die and the lower die and punch it into a workpiece by means of the die. , to achieve pressure processing. The clutch is controlled by the pedals through the operating mechanism to realize the movement or stop of the crank-slider mechanism. The brake and the clutch are closely matched, and the crank slider mechanism can be stopped at a certain position after the clutch is disengaged (generally, the slider is at the top dead point). The gearwheel also acts as a take-off wheel to make the motor load uniform and to store and release energy efficiently.
Looking forward to your inquiry for this crank press machine press screw