Call us at 0086 13869856893

Our Product Detail

Welcome to our website!

_
_

forging screw press

Double disk friction screw press for the fuselage, the fuselage and the upper beam with two tensioning bolts heated tension to form a rigid overall, on the left and right sides of the beam each fixed with an arm, supported by two bearings Drive shaft components.

Products Details

This is the description of forging screw press

Products Details

 

 

Main Features of double disk friction press 

1. This machine adds a maintenance platform, it is helpful that customers adjust the machine after a period of time. 
2. Equipped with emergency stop device 
3. Quick pressing down speed, slide can stop at any position inside stroke range 
4.Manual shut height ajdustment with scale display 

Main technical data of double disk friction press:

Type

J53-100

Normal pressure

1000KN

Stroke

310mm

Stroke time

19times/min

Energy

5000J

Min. open height

320mm

Dimension of working table

500x450mm

Ram dimension

390x280mm

Knock out stroke

120mm

Motor power

7.5kw

Dimension

1100x1900x3420mm

Weight

5700kg

 

Double disk friction screw press structure what are the characteristics?
Double disk friction screw press for the fuselage, the fuselage and the upper beam with two tensioning bolts heated tension to form a rigid overall, on the left and right sides of the beam each fixed with an arm, supported by two bearings Drive shaft components. Each side of the drive shaft is equipped with a friction plate, which drives the flywheel forward or reverse by its friction. The flywheel is an integral structure, the upper end of the screw is connected with the tangential key, the lower end of the screw is hinged and installed in the slider, the slider is box-shaped, the guide surface at the four corners of the slider is matched with the guide rail on the fuselage side column, For reciprocating movement. A belt brake is mounted above the slider for braking the screw.

LEAVE A MESSAGE