friction press machine screw press manufacturers
J53 series double disc friction press are used in the forging,extruding,trimming, bending and adjusting of non-ferrous and ferrous metals as well as the pressing and forming of refractory materials.
J53 series double disc friction press are used in the forging,extruding,trimming, bending and adjusting of non-ferrous and ferrous metals as well as the pressing and forming of refractory materials. this series machine has following advantages: 1.simple and stable structure; 2.large energy; 3.low noise; 4.long lifetime; 5.safe and easy to operate and maintenance. It’s widely applied in aviation,automobile, tractor,tools and hardwares, rigging, textile machinery etc.
|Stroke of slide||mm||200||310||360||360||400||400||500||500||600||600|
|Times of stroke||min-1||35||19||17||17||15||15||14||14||11||11|
|Minimum shut height||mm||315||320||260||260||300||300||520||520||650||650|
|Height of bolster||mm||80||100||120||120||180||180|
|Main motor power||KW||5.5||7.5||11||11||22||22||30||30||55||55|
|Stroke of slide||mm||700||700||700||800||800||800||800||900||900||800|
|Times of stroke||min-1||10||10||10||9||9||9||9||9||8||8|
|Minimum shut height||mm||700||750||750||980||980||1100||1100||1120||1130||1130|
|Height of bolster||mm||200||200||200||280||280||300||300||300||330||330|
|Main motor power||KW||90||132||132||2X110||2X110||2X160||2X185||2X185||2X200||2X200|
How Screw Press Manufacturers Work
The flywheel adopts a slipping safety device to ensure that the equipment can produce a great deal of blow energy, and in the event of a large output, the flywheel can skid protection equipment. The main lubrication points are fully centralized and lubricated to prevent abrasion and to protect the screw. The top material adopts a hydraulic ejection mechanism, which can adjust the ejection stroke and ejection force. The ejection is stable and reliable. The platform has good rigidity and low vibration. The electronic control system adopts relay control, which is easy to use and sensitive and reliable. Photoelectric protection can be installed to ensure the safety of the operator. The tonnage indicator can be installed to show the striking force when the equipment is working. The motor drives the flywheel, and the slider drives the slider up and down. After the start signal is input, the motor is moved from the stationary state via the pinion gear, and the large gear drives the slider to accelerate downward. When the motor reaches the speed required for the pre-set striking energy, the energy stored in the large gear is used for the work to form the workpiece.
Looking forward to your inquiry for this friction press machine screw press manufacturers.