Call us at 0086 13869856893

Our Product Detail

Welcome to our website!

_
_

screw press machine friction press machine

Cookware press is used to make stainless steel double bottom cookware. It is a high precision pressing device.

Products Details

This is the description of screw press machine friction press machine

Products Details

Cookware press is used to make stainless steel double bottom cookware. It is a high precision pressing device. This machine has following advantages: 1. whole stroke brake 2. photoelectricity protection system. 3. saving energy and materials 4. high efficiency 5. simple and stable structure 6. large energy 7. long working life

 
Main parameters Unit EP-630 EP-1000 EP-1600 EP-2500
Nominal force KN 6300 10000 16000 25000
Continuous force KN 10000 16000 25000 40000
Cold  force KN 12500 20000 32000 50000
Energy KJ 60 120 240 500
 Ram stroke mm 500 550 650 700
Max blowing speed m/s 0.7 0.65 0.65 0.65
Times of ram stroke min-1 20 16 12 11
Die height   mm 600 700 800 920
   Size  of front/back mm 920 1000 1250 1250
  ram bottom left/right mm 690 800 930 930
 Dimention of front/back mm 920 1000 1250 1400
 table bolster left/right mm 800 900 1000 1400
  height mm 180 180 200 上180/下240
Distance between  guide strip mm 707 810 940 1250
Ejection force KN 100 100 600 600
Ejection stroke mm 100 100 150 150
  front/back mm 2200 2300 3240 4800
 Overall dimention left/right mm 2400 2500 3695 4800
  height mm 6000 6600 7055 8350
Main motor power KW 75 110 2x110 2x160
Weight Kg 45000 75000 120000 260000
Height above the ground mm 5780 6200 6080 7200

 

screw press machine
screw press machine

friction press machine
friction press machine
screw press machine
friction press machine
screw press machine friction press machine

Safe operation of friction press machine
1. The general safety procedures for stamping workers should be observed. When stamping forgings, the general working procedures for forging workers should also be observed.
2. The installation of the mold should take measures to prevent the upper mold from falling. The closing height of the mold must be correct.
3. Before driving, you must check the position of the upper mold holder, whether the cushion is intact and whether the fastener is loose.
4. When starting the equipment, start the oil pump (or open the compressed air valve first) and start the motor. In contrast to parking, the motor must be switched off and the oil pump (or compressed air valve) closed.
5. When working, pay attention to whether the oil pump pressure or compressed air pressure is normal.
6. When the flywheel rotates, it is not allowed to adjust or install the mold.
7. After the work is completed, the upper and lower molds will be smoothly rested and the cars will be shut down in order.
Looking forward to your inquiry for thisscrew press machine friction press machine

LEAVE A MESSAGE