Composition of the crank press machine
1) bed body
The bed is the skeleton of the press, which takes all the punching pressure and connects all the parts and components of the press to ensure the precision, strength and rigidity required by the whole machine. A table is fixed on the bed for the lower die of the die.
2) Work organization
It is a crank connecting rod mechanism composed of a crankshaft, a connecting rod and a slider. The motor transmits the energy to the pulley through the V-shaped belt, passes the transmission shaft through the pinion gear and the large gear to the crankshaft, and turns the rotation of the crankshaft into the reciprocating linear motion of the slider through the connecting rod. The upper die of the die is fixed on the slider. The role of pulley and takeoff wheel is to make the press load evenly throughout the work cycle, and energy can be fully utilized.
3) Operating System
Made up of brakes, clutches, etc. The clutch is the mechanism used to start and stop the press action. The brake is to stop the slider in the desired position when the clutch is disengaged. The disengagement and closing of the clutch, ie the opening and stopping of the press, is controlled by the operating mechanism.
4) Transmission system
Including pulley drive, gear transmission and other institutions.
5) Energy system
Including motor, flywheel (belt).
In addition to the above-mentioned basic parts, the crank press has various auxiliary devices such as lubrication system, safety device, counting device and air cushion.
Looking forward to your inquiry for this crank press machine press screw