Call us at 0086 13869856893

News Detail

Welcome to our website!

screw press machine friction press machine

2018-03-30 10:08:40

screw press machine
screw press machine

friction press machine
friction press machine
screw press machine
friction press machine
screw press machine friction press machine

Preparatory work for friction press machine
1, check the friction press mold should be installed correctly, fastened firmly. The resultant center of stampings should coincide with the press center as much as possible. The die support area must not be less than one-third of the punch bottom area.
2. The friction press clears the stroke space of the punch and the debris in the mold space.
3. After the friction press is used to run the test car or change the mold or adjust the closing height, the first stroke of the punch is only allowed to manually move the flywheel. Check and confirm that the mold closing height and the position of the screw are adjusted before starting the equipment.
4. The flywheel and the clutch must be disengaged to start the main motor. The direction of rotation of the flywheel must be the same as the direction of the flag.
Looking forward to your inquiry for thisscrew press machine friction press machine